Compufox's QSFP-40G-IR4-2KM QSFP+ Module supports link lengths of up
to 2km over a singlemode fiber with LC connectors. The 40 Gigabit
Ethernet signal is carried over four wavelengths. Multiplexing and
demultiplexing of the four wavelengths are managed within the device.
The 40GBASE-IR4 QSFP+ also supports OTU3 data rate in addition to
40GBase Ethernet rate. It combines the higher density attractions of
parallel modules with some of the key advantages normally associated
with SFP+ based modules. It is intended for use on short reach applications
in switches, routers and data center equipment where it provides higher
density and lower cost when compared with standard SFP+ modules.
The module operates with single +3.3V power supply. LVCMOS/LVTTL global control signals, such as Module Present, Reset, Interrupt and Low Power Mode, are available with the module. A 2-wire serial interface is available to send and receive more complex control signals, and to receive digital diagnostic information. Individual channels can be addressed and unused channels can be shut down for maximum design flexibility.
Features
- 4 CWDM lanes MUX/DEMUX design
- Up to 12.5Gbps data rate per wavelength
- QSFP+ MSA compliant
- IEEE 802.3ba Electrical Interface
- Up to 2km transmission
- Optical link budget: 9.5dB
- Operating case temperature: 0ºC~70ºC
- Maximum 3.5W operation power
- SMF LC duplex connector
- RoHS compliant
Specifications
- Part Number: QSFP-40G-IR4-2KM
- Product Type: Transceiver Module
- Form Factor: QSFP+
- Data Rate (max): 41.2Gb/s
- Distance (max): 2KM
- Transmitter: FP 1310nm
- Receiver: PIN
- Digital Diagnostic: Yes
- Connector: Duplex LC
- Cable Type: SMF
- Wavelength: 1310nm Band
- Operating Temperature: 0 to 70°C (32 to 158°F)